We click the Open File icon in the left (левом?) upper corner. Having placed the workpiece on the work table, we import an image (let it be the ENDURANCE logo). It is important that you follow the safety rules when operating a laser. «Focus» turns on the laser for focusing (3%). For this we place a piece of wood on the work table and check if the machine responds to the ON and OFF commands.įor this there are several buttons on the bottom bar tool. The next step is to prepare the work field. For resetting we click the Home icon ( this function is activated if you have end switches installed). Next, we test the carriage movement using the arrows in the left bottom corner. The right runner adjusts the step size of the laser head when you click the movement buttons. In the left bottom corner we set the laser movement speed. It is also possible to enter the speed, acceleration, steps and other parameters manually. For this we select and import the file with the configuration of our machine.
Here you can configure the GRBL firmware or import the existing one.
To do this, select GRBL Configuration in the GRBL tab. If the connection is successful you will see the info about your machine and its firmware.įor the correct operation of all the machine elements and correct sizing, you need to adjust the configuration of your machine. Once connected, we run LaserGrbl, select the COM port, to which our laser is connected, and click the “Connect” icon.
To start using your laser machine you need to connect to it your computer via a USB cable. G0 X Y F3000 M3 S1 F3000 G1 X Y G1 X Y G1 X Y G1 X Y G0 X Y M5 G0 X0 Y0 F3000 Here is a copy so you can copyright in and add button Other code can be added as well which is here below. First Right-click here and click add custom bottom.Ĭode for Trace Frame and how it should be setup. here is how to add the code in and the code as well. Trace frame is a must to any engraving so you can line up your work right. comport will be the one you have plugged in to. Link:Įleksmaker Board (a universal laser engraver) and Firmwareĭevice manager When open go down to ports and right-click this is what it should be set to if not change the setting to match this picture. If this dose not connect like in this picture. How to connect first plug laser in to usb the click the lightning bolt. Is a free software that can be used with most laser engravers.
0 kommentar(er)
